Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / Transfer driven gear / Adjustment

NOTE:

When the transfer driven gear or bearing is replaced, select the transfer driven gear shim. Transfer Clutch > ADJUSTMENT

Removal

1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Remove the extension case. Extension Case > REMOVAL3. Remove the transfer clutch assembly. Transfer Clutch > REMOVAL ...

Installation

1. Install the transfer driven gear assembly.2. Install the transfer clutch assembly. Transfer Clutch > INSTALLATION3. Select the transfer driven gear shim. Transfer Clutch > ADJUSTMENT4. Install th ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle, and then remove the rear wheels.3. Remove the nut - axle.CAUTION:Do not loosen the nut - axle while the rear axle is loaded. Doing so may damage the hub unit COMPL.(1) Lift the crimped section of the nut - axle.(2) R ...