Honda Civic manuals

Subaru Legacy Service Manual: Caution

Remove contamination including dirt and corrosion before removal, installation or disassembly.

Keep the disassembled parts in order and protect them from dust and dirt.

Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly and replacement.

Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.

Use SUBARU genuine fluid, grease etc. or equivalent. Do not mix fluid, grease, etc. of different grades or manufacturers.

Be sure to tighten fasteners including bolts and nuts to the specified torque.

Apply grease onto sliding or revolving surfaces before installation.

Before installing O-rings or snap rings, apply sufficient amount of fluid to avoid damage and deformation.

Before securing a part in a vise, place cushioning material such as wood blocks, aluminum plate or cloth between the part and the vise.

Keep fluid away from the vehicle body. If any fluid contacts the vehicle body, immediately flush the area with water.

Specification
Model2.5 L non-turboTransmission type6MTClutch coverTypePush typeDiaphragm set loadN (kgf, lbf)5,688 (580, 1,279)Clutch discFacing materialWoven (non-asbestos)O.D. - I.D. - Thicknessmm (in)Flywheel si ...

Preparation tool
1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS498497100CRANKSHAFT STOPPERUsed for stopping rotation of the flywheel.499747100CLUTCH DISC GUIDEUsed for installing the clutch disc to the flywh ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the roof spoiler. Roof Spoiler > REMOVAL3. Remove the trim panel - rear gate and the motor assembly - rear wiper. Rear Wiper Motor > REMOVAL4. Disconnect the rear defogger connector.5. Remove the touch sensor LWR. (Model with po ...

© 2017-2019 Copyright www.sulegacy.com