Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Caution

CAUTION:

Do not use the electrical test equipment on the airbag system wiring harnesses and connector circuits.

Be careful not to damage the airbag system wiring harness.

While diagnostic items are being checked, do not operate radios, portable telephones, etc. which emit electromagnetic waves near or inside the vehicle.

When turning the ignition switch to ON or OFF while diagnostic items are being checked, do not allow keys with different ID codes close to the ignition switch. If the ignition key is on a key holder, remove it from the key holder before performing diagnoses.

When repeatedly turning the ignition switch to ON or OFF while diagnostic items are being checked, it should be switched in cycles of “ON” for at least 5 seconds > “OFF” for at least 8 seconds.

(1)

Ignition switch position

(2)

Sec.

If the engine fails to start with a registered ignition key, detach the ignition key from ignition switch and wait for approx. 1 second until security indicator light begins to flash. And then start the engine again.

Before performing the diagnostics, obtain all keys for the vehicle from the owner.

Do not register a body integrated unit already registered to another vehicle to diagnose failures or inspect functions.

Preparation tool
1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — (Newly adopted tool)SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed op ...

Read current data
...

Other materials:

List
ItemDisplayNoteTrip Count — General Description > CAUTIONCount — Time Count [msec] — Belt Buckle Switch LHUnbelted/Belted/Other“Belted” when the left side seat belt is fastened“Unbelted” when the left side seat belt is not fastened“Other” in other casesBelt ...

© 2017-2024 Copyright www.sulegacy.com