Subaru Legacy BN/BS (2015-2019) Service Manual: Diagnostic procedure with diagnostic trouble code (dtc)
Subaru Legacy BN/BS (2015-2019) Service Manual / Immobilizer (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc)
- Dtc b1571 reference code incompatibility (immobilizer cm to ecm)
- Dtc b1401 meter collation
- Dtc b1414 immobilizer control module non-volatile memory
- Dtc b1413 immobilizer control module battery power supply
- Dtc b1412 immobilizer control module can register stuck
- Dtc b1578 meter
- Dtc b1577 imm control module eeprom
- Dtc b1576 egi control module eeprom
- Dtc b1575 incorrect immobilizer key
- Dtc b1574 key communication
- Dtc b1572 imm circuit except antenna circuit
- Dtc b1570 antenna
- Dtc b1411 immobilizer antenna
- Dtc b1410 transponder communication
- Dtc b1408 meter non-volatile memory
- Dtc b1407 met communication
- Dtc b1402 immobilizer key collation
Read diagnostic trouble code (dtc) operation
NOTE:• For detailed operation procedures, refer to “Application help”.• For details concerning DTC, refer to List of Diagnostic Trouble Code (DTC). List of Diagnostic Trouble ...
Dtc b1571 reference code incompatibility (immobilizer cm to ecm)
1. EXCEPT FOR C0 AND C5 MODELSDIAGNOSIS START CONDITION:• Battery voltage is 10 V or more.• The remote engine starter was not used to start the engine.DTC DETECTING CONDITION:Reference cod ...
Other materials:
Installation
CAUTION:Make sure that the harness grommet is securely installed.If not properly installed, this may cause leaks.1. Install the rear lock button and the switch - opener rear gate.2. Install the garnish assembly - rear gate. Rear Gate Garnish > INSTALLATIONTightening torque4.5 N·m (0.4 kgf-m, ...
© 2017-2024 Copyright www.sulegacy.com
