Subaru Legacy BN/BS (2015-2019) Service Manual: Drive plate

Assembly

1. Install the O-ring to plug and install the plug to drive pinion retainer.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)2. Usi ...

Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Set the ST.NOTE:Set the ST to the drive plate referring to the illustration.ST 498497300CRANKSHAFT ...

Other materials:

Installation
1. Install the fuel pump assembly to the fuel tank.CAUTION:Set the arm and float of the fuel level sensor while paying attention to prevent them from contacting the fuel tank. If the arm of the fuel level sensor is bent, the fuel gauge may not read correctly.NOTE:Use a new gasket.(1) Make sure the s ...