Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b1775 belt tension sensor output too low

Subaru Legacy BN/BS (2015-2019) Service Manual / Occupant detection system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b1775 belt tension sensor output too low

DTC DETECTING CONDITION:

• Passenger’s seat belt tension sensor is faulty.

• Airbag main harness circuit is open or shorted.

• Occupant detection control module is faulty.

For the diagnostic procedure, refer to DTC B1773. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1773 BELT TENSION SENSOR CIRCUIT OPEN

Dtc b1776 belt tension sensor input voltage high

DTC DETECTING CONDITION:• Passenger’s seat belt tension sensor is faulty.• Airbag main harness circuit is open or shorted.• Occupant detection control module is faulty.For the ...

Dtc b1774 belt tension sensor output too high

DTC DETECTING CONDITION:• Passenger’s seat belt tension sensor is faulty.• Airbag main harness circuit is open or shorted.• Occupant detection control module is faulty.For the ...

Other materials:

Installation
1. Install the purge control solenoid valve, and connect the connector and vacuum hose to the purge control solenoid valve.NOTE:Connect the vacuum hose as shown in the figure.(a)To intake manifold(b)To fuel pipe Tightening torque:19 N·m (1.9 kgf-m, 14.0 ft-lb)2. Install the air intake boot. ...