Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc p000c "a" camshaft position slow response bank 2

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h4do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc p000c "a" camshaft position slow response bank 2

NOTE:

For the diagnostic procedure, refer to DTC P0021. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0021 "A" CAMSHAFT POSITION - TIMING OVER-ADVANCED OR SYSTEM PERFORMANCE BANK 2

1. OUTLINE OF DIAGNOSIS

NOTE:

For the detection standard, refer to P000A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P000A "A" CAMSHAFT POSITION SLOW RESPONSE BANK 1

Dtc p0010 "a" camshaft position actuator control circuit/open bank 1

DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and ...

Dtc p000a "a" camshaft position slow response bank 1

NOTE:For the diagnostic procedure, refer to DTC P0011. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0011 "A" CAMSHAFT POSITION - TIMING OVER-ADVANCED OR SYSTEM PERFORMANCE BANK 11. ...

Other materials:

Operating conditions
The Reverse Automatic Braking system will operate when all of the following conditions are met. The ignition switch is in the "ON" position The EyeSight warning indicator is off The RAB warning indicator is off HALT (Reverse Automatic Braking system OFF) indic ...