Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc p013e o2 sensor delayed response - rich to lean bank 1 sensor 2

NOTE:

For the diagnostic procedure, refer to DTC P013A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P013A O2 SENSOR SLOW RESPONSE - RICH TO LEAN BANK 1 SENSOR 2

1. OUTLINE OF DIAGNOSIS

Detect the delayed response of rear oxygen sensor output for rich > lean.

After the deceleration fuel cut has started, detect the trouble by calculating the time when the rear oxygen sensor output decreases to the predetermined voltages.

Judge as NG when the response time is larger than the threshold value.

2. COMPONENT DESCRIPTION

(A)

Electromotive force

(B)

Air fuel ratio

(C)

Lean

(D)

Rich

(E)

Theoretical air fuel ratio

(F)

Comparative voltage

(1)

Atmosphere

(2)

Exhaust gas

(3)

Electromotive force

3. EXECUTION CONDITION

Secondary Parameters

Execution condition

Battery voltage

> 10.9 V

Rear oxygen sensor voltage when fuel cut starts

≥ 0.55 V

Estimated temperature of rear oxygen sensor element when fuel cut starts

≥ 500 °C (932 °F)

Status of fuel system

= Fuel cut

4. GENERAL DRIVING CYCLE

Perform the diagnosis only once when the deceleration fuel cut is activated from a high and constant speed driving.

5. DIAGNOSTIC METHOD

Detect the trouble by calculating the time from the beginning of the fuel cut to the beginning of the rear oxygen sensor voltage starting to drop.

(A)

0.5 V

(B)

0 V

(C)

Diagnostic parameter

(D)

Normal

(E)

Malfunction

Judge as NG when the following conditions are established.

Judgment Value

Malfunction Criteria

Threshold Value

Time when rear oxygen sensor voltage changed to 0.5 V after the fuel cut started

> 4000 ms

Time Needed for Diagnosis: 5000 ms

Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.

Dtc p013f o2 sensor delayed response - lean to rich bank 1 sensor 2
NOTE:For the diagnostic procedure, refer to DTC P013A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P013A O2 SENSOR SLOW RESPONSE - RICH TO LEAN BANK 1 SENSOR 21. OUTLINE OF DIAGNOSI ...

Dtc p013b o2 sensor slow response - lean to rich bank 1 sensor 2
NOTE:For the diagnostic procedure, refer to DTC P013A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P013A O2 SENSOR SLOW RESPONSE - RICH TO LEAN BANK 1 SENSOR 21. OUTLINE OF DIAGNOSI ...

Other materials:

Dtc u0423 invalid data received from instrument panel cluster control module
DTC DETECTING CONDITION:Defective data was transmitted from combination meter.TROUBLE SYMPTOM:Display of combination meter does not operate properly.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagnostic procedure performed up to STEP 8- Diagnostic Procedure with Dia ...

© 2017-2024 Copyright www.sulegacy.com