Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0327 software incompatibility with vehicle security control module

DTC DETECTING CONDITION:

No data is received from keyless access CM.

TROUBLE SYMPTOM:

Cooperation control of keyless access does not operate properly.

STEPCHECKYESNO

1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.

Was the basic diagnostic procedure performed up to STEP 8-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0327 SOFTWARE INCOMPATIBILITY WITH VEHICLE SECURITY CONTROL MODULE

Perform the basic diagnostic procedure. Basic Diagnostic Procedure

2.CHECK DTC.

Check the displayed DTC.

Are DTCs other than U*** displayed-

Perform the diagnosis according to DTC.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0327 SOFTWARE INCOMPATIBILITY WITH VEHICLE SECURITY CONTROL MODULE

3.CHECK DTC.

Check the displayed DTC.

Is U0327 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0327 SOFTWARE INCOMPATIBILITY WITH VEHICLE SECURITY CONTROL MODULE

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0327 SOFTWARE INCOMPATIBILITY WITH VEHICLE SECURITY CONTROL MODULE

4.CHECK DTC.

Using the Subaru Select Monitor, read DTC of all the systems.

Is the smart data no-receive detected in several modules-

Replace the keyless access CM. Keyless Access CM

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0327 SOFTWARE INCOMPATIBILITY WITH VEHICLE SECURITY CONTROL MODULE

5.REPLACE MODULE.

1) Replace the keyless access CM.

NOTE:

Do not register the keyless access CM.

2) Read the DTC using Subaru Select Monitor.

Is U0327 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0327 SOFTWARE INCOMPATIBILITY WITH VEHICLE SECURITY CONTROL MODULE

System is normal.

NOTE:

Register the keyless access CM.

6.CHECK MODULE.

1) Reinstall the keyless access CM.

2) Replace the module that the DTC has been detected.

3) Read the DTC using Subaru Select Monitor.

Is U0327 a current malfunction-

Replace the keyless access CM. Keyless Access CM

System is normal.

7.CHECK HARNESS.

1) Shake the harness, and check for poor contact.

2) Read the DTC using Subaru Select Monitor.

Is U0327 a current malfunction-

Repair the poor contact of harness, or replace the harness.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0327 SOFTWARE INCOMPATIBILITY WITH VEHICLE SECURITY CONTROL MODULE

8.CHECK CONNECTOR.

Check the connector used for high speed CAN for poor contact.

Is there poor contact of connector-

Repair the connector that has poor contact, or replace harness.

It is possible that temporary poor communication occurs. Delete the DTC.

Dtc u0401 invalid data received from ecm/pcm "a"
DTC DETECTING CONDITION:Defective data from ECM.TROUBLE SYMPTOM:Defective data on CAN communication occurs.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagnostic proce ...

Dtc u0164 lost communication with hvac control module
DTC DETECTING CONDITION:No data is received from A/C CM.TROUBLE SYMPTOM:Cooperation control of air conditioner does not operate properly.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE. ...

Other materials:

Operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» display, select «Air Conditioner» and select «Enter».5. On «Select Functio ...

© 2017-2024 Copyright www.sulegacy.com