Subaru Legacy BN/BS (2015-2019) Service Manual: Front hub unit bearing
1. Place alignment marks on the shaft and outer race.2. Remove the PTJ boot band and boot.CAUTION:Be careful not to damage the boot.3. Remove the snap ring from PTJ outer race.4. Remove the PTJ outer ...
1. Lift up the vehicle, and then remove the front wheels.2. Remove the nut - axle.CAUTION:Do not loosen the nut - axle while the front axle is loaded. Doing so may damage the hub unit COMPL.(1) Lift t ...
Other materials:
Assembly
NOTE:After assembling, manually turn the pulley to check that the rotor rotates smoothly.1. Use the following procedures to install the rectifier.(1) Remove old silicone grease on the mating surface of rear cover and rectifier and apply new silicone grease.CAUTION:Do not apply silicone grease to the ...