Honda Civic manuals

Subaru Legacy Service Manual: General diagnostic table inspection

Subaru Legacy Service Manual / Front suspension / General diagnostic table inspection

1. IMPROPER VEHICLE POSTURE OR IMPROPER WHEEL ARCH HEIGHT

Possible cause

Corrective action

(1) Deformation or damage of suspension parts

Replace.

(2) Rough operation of strut COMPL or shock absorber COMPL

Replace.

(3) Improper installation of strut COMPL or shock absorber COMPL

Replace with appropriate parts.

(4) Installation of the wrong coil spring

Replace with appropriate parts.

2. POOR RIDE COMFORT

1. Large rebound shock.

2. Rocking of the vehicle continues too long after running over bump and hump.

3. Excessive shock in bumping.

Possible cause

Corrective action

(1) Damaged coil spring

Replace.

(2) Overinflation of tires

Adjust.

(3) Improper wheel arch height

Replace the coil springs with new parts.

(4) Defective operation of strut assembly or strut COMPL - front

Replace.

(5) Damage or deformation of strut mount - front or shock absorber mount

Replace.

(6) Unsuitable length (maximum or minimum) of strut assembly or shock absorber

Replace with appropriate parts.

(7) Abnormal deformation or loss of bushing

Replace.

(8) Deformation or damage of helper in strut assembly or strut COMPL - front

Replace.

(9) Oil leakage from the strut assembly or strut COMPL - front

Replace.

3. NOISE

Possible cause

Corrective action

(1) Wear or damage of strut assembly or strut COMPL - front component parts

Replace.

(2) Loosening of the suspension link installing bolt

Tighten to the specified torque.

(3) Abnormal deformation or loss of bushing

Replace.

(4) Unsuitable length (maximum or minimum) of strut assembly or strut COMPL - front

Replace with appropriate parts.

(5) Damaged coil spring

Replace.

(6) Wear or damage of the ball joint

Replace.

(7) Deformation of the clamp - stabilizer bushing

Replace.

Front suspension
...

Cradle
...

Other materials:

Dtc u0073 control module communication bus off
NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSIS (ENGINE TYPE FB)• Detect malfunction of CAN communication.• Judge as NG when CAN communication failure has occurred.2. EXECUTION CONDITION (ENGINE TYPE FB)Sec ...

© 2017-2019 Copyright www.sulegacy.com