Subaru Legacy BN/BS (2015-2019) Service Manual: Generator

Component

1. STARTER(1)Starter housing ASSY(9)Overrunning clutch(17)Sleeve bearing(2)Sleeve bearing(10)Internal gear ASSY(18)Starter cover ASSY(3)Shift lever(11)Shaft (4)Plate(12)Pinion gearTightening torque: N ...

Removal

1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. ...

Other materials:

Installation
CAUTION:Be sure to prevent water or oil from contacting the connector terminal of turbine speed sensor. If adhesion occurs, replace with a new part.1. Install the turbine speed sensor.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:7 N·m (0.7 kgf-m, 5.2 ft-lb) ...