Subaru Legacy BN/BS (2015-2019) Service Manual: Glove box

Installation

CAUTION:Install the under cover so that the under cover front end (b) comes inside of the bumper face - front (a).1. Install the under cover - front.Tightening torque:Refer to “COMPONENT” ...

Removal

NOTE:Refer to “Security and Locks” section for key cylinder replacement. Key Lock Cylinders > REMOVAL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the pocket assem ...

Other materials:

Installation
CAUTION:Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.1. Connect the harness connector.2. Install the primary speed sensor.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:7 ...