Honda Civic manuals

Subaru Legacy Service Manual: Inspection

Check the drive cable for damage.

Removal
1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Set the ST.NOTE:Set the ST to the drive plate referring to the illustration.ST 498497300CRANKSHAFT STOPPER3. Remove ...

Installation
1. Temporarily install the drive plate and reinforcement drive plate.NOTE:Align the knock pin hole of the crankshaft position sensor plate to the knock pin of the crankshaft to secure the knock pin.2. ...

Other materials:

Dtc b2284 brake signal correlation
DTC DETECTING CONDITION:When the brake signal transmitted via the hard wire and the brake signal transmitted from body integrated unit via CAN communication line do not match.TROUBLE SYMPTOM:If the hard-wired brake signal is faulty, the engine will not start.CAUTION:For replacement procedure of keyl ...

© 2017-2020 Copyright www.sulegacy.com