Subaru Legacy Service Manual: Inspection

Subaru Legacy Service Manual / Continuously variable transmission(tr580) / Reduction drive gear / Inspection

Check the reduction drive gear for breakage or damage.

Installation

1. Install the reduction drive gear to secondary pulley.2. Select the reduction drive gear shim. Reduction Drive Gear > ADJUSTMENT3. Install the dish plates, spring retainers, and selected reduction ...

Reduction driven gear

...

Other materials:

Adjustment
Selection of main shaft rear plate:Measure the protrusion amount (A) of bearing from transmission main case surface, and select a suitable plate in the following table.NOTE:Before measuring, tap the end of main shaft with a plastic hammer lightly in order to make the clearance zero between the main ...