Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h6do) / Engine control module (ecm) / Inspection

Check that the ECM has no deformation, cracks or other damages.

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. While pressing the section (A) shown in the figure, move the lock lever (B) in the direction of the arrow to disconnect the connectors fr ...

Installation

CAUTION:When the ECM of model with immobilizer has been replaced, be sure to perform the registration of immobilizer system. (Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER”.)NOTE:When ...

Other materials:

Removal
1. Hold the rear gate to the fully open position.2. Disconnect the ground terminal from battery sensor. NOTE3. Release the claws and then remove the cap - rear quarter pillar UPR LH.4. Remove the rod - power rear gate.CAUTION:• Using a small flat tip screwdriver wrapped with protective tape, ...