Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Mechanical(h4do) / Engine mounting / Inspection

Check that the engine mounting does not have deformation, cracks and any other damage.

Removal

1. FRONT CUSHION RUBBER AND ENGINE MOUNTING BRACKET1. Fully open the front hood. NOTE2. Disconnect the ground terminal from battery sensor. NOTE3. Remove the air intake duct. Air Intake Duct > REMO ...

Installation

1. FRONT CUSHION RUBBER AND ENGINE MOUNTING BRACKET1. Install the engine mounting bracket onto the engine.Tightening torque:30 N·m (3.1 kgf-m, 22.1 ft-lb)2. Install the front cushion rubber to ...

Other materials:

Dtc p014e a/f / o2 sensor slow response - rich to lean bank 2 sensor 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK EXHAUST SYSTEM.NOTE:Check the foll ...