Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / Converter case / Installation

1. Install the oil pump. Oil Pump > INSTALLATION

2. Install the oil pump chain cover. Oil Pump Chain > INSTALLATION

3. Install the front differential assembly. Front Differential Assembly > INSTALLATION

4. Install the drive pinion shaft assembly. Drive Pinion Shaft Assembly > INSTALLATION

5. Install the forward clutch assembly. Forward Clutch Assembly > INSTALLATION

6. Install the reverse brake assembly. Reverse Brake Assembly > INSTALLATION

7. Install the primary pulley, secondary pulley and variator chain. Primary Pulley and Secondary Pulley > INSTALLATION

8. Install the reduction drive gear. Reduction Drive Gear > INSTALLATION

9. Install the transmission case. Transmission Case > INSTALLATION

10. Install the transmission control device. Transmission Control Device > INSTALLATION

11. Install the oil strainer and oil pan. Oil Pan and Strainer > INSTALLATION

12. Install the reduction driven gear assembly. Reduction Driven Gear > INSTALLATION

13. Install the transfer driven gear assembly. Transfer Driven Gear > INSTALLATION

14. Install the transfer clutch assembly. Transfer Clutch > INSTALLATION

15. Install the parking pawl. Parking Pawl > INSTALLATION

16. Install the extension case. Extension Case > INSTALLATION

17. Install the inhibitor switch. Inhibitor Switch > INSTALLATION

18. Install the secondary speed sensor. Secondary Speed Sensor > INSTALLATION

19. Install the primary speed sensor. Primary Speed Sensor > INSTALLATION

20. Install the turbine speed sensor. Turbine Speed Sensor > INSTALLATION

21. Install the transmission harness. Transmission Harness > INSTALLATION

22. Install the control valve body. Control Valve Body > INSTALLATION

23. Install the air breather hose. Air Breather Hose > INSTALLATION

24. Install the transmission assembly. Automatic Transmission Assembly > INSTALLATION

Assembly

1. Install the oil drain plug.Tightening torque:70 N·m (7.1 kgf-m, 51.6 ft-lb)2. Install the overflow drain plug.NOTE:Overflow plug of differential gear oil is temporarily attached.3. Install a ...

Inspection

• Check for leakage of CVTF from the connection between converter case and transmission case.• Check there is no damage or cracks on the converter case. ...

Other materials:

Inspection
1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard1 — 4Switch OFF1 M- or moreSwitch ONLess than 1 -2. Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.Term ...