Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
CAUTION: Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION 1. Install the duct - center vent and the duct - side ventilation. 2. Install the instrument panel assembly. Instrument Panel Assembly > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. Check installation condition of duct. Connect the duct properly if defective.2. Check that no foreign matter is mixed in the duct. Remove the foreign matter if any. ...
Hose and pipe
...
Other materials:
Installation
1. INTAKE SIDE1. Install the intake oil flow control solenoid valve, and connect the connector to the intake oil flow control solenoid valve.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)2. Connect the ground terminal to battery sensor. NOTE3. Install the collector cover.2. EXHAUST SIDE1. ...
© 2017-2024 Copyright www.sulegacy.com
