Honda Civic manuals

Subaru Legacy Service Manual: List

Item Name

Contents

Standard

Note

Trip Count

Time stamp information, trip counter

Count

Time stamp information, original counter identification information

Time Count [msec]

Time stamp information, time counter

F Sensor Signal

Output voltage value from front vehicle height sensor

5V

Fixed at 5 V because front vehicle height sensor is not equipped.

R Sensor Signal

Output voltage value from rear vehicle height sensor

Approx. 2.5 V

Changes according to vehicle condition.

Actuator Signal

Power supply voltage value to headlight beam leveler actuator

Not in operation: 0%

In operation: 10 — 90% (17 seconds)

Changes according to vehicle condition.

ECU ACC

IG voltage condition of auto headlight beam leveler CM

8 — 16 V

Indicator Signal

Meter indicator condition

Light off: Normal

Light up: Abnormal

Blinks 3 times at 2 Hz.: When blinking 3 times at 2 Hz

Blinks 2 times at 2 Hz.: When blinking twice at 2 Hz

Check Bulb: When checking bulbs

Vehicle Speed Signal

Vehicle speed condition

Show vehicle speed

H/L Lo Signal

Headlight lighting condition

Light off: light switch OFF

Light up: light switch HEAD or light switch AUTO with light sensor operated

LED HEADLAMP(LH) error Signal

Open circuit detection signal status

OFF: Open circuit not detected

ON: Open circuit detected

Displays as «Invalid» because the LED headlight is not equipped.

LED HEADLAMP(RH) error Signal

Open circuit detection signal status

OFF: Open circuit not detected

ON: Open circuit detected

Displays as «Invalid» because the LED headlight is not equipped.

Operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. ...

Subaru select monitor
...

Other materials:

Read diagnostic trouble code (dtc) operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System Check».4. On «Select System» display, select «Power Steering».5. On «Select Function» display, select «D ...

© 2017-2019 Copyright www.sulegacy.com