Honda Civic manuals

Subaru Legacy Service Manual: List

«Subaru Rear Vehicle Detection(LH)»

Display

Content

Reference value

Note

SRVD System fail flag

Current failure status of BSD/RCTA system is displayed.

Normal

Fail

SRVD System HALT flag

Current temporary stop status of BSD/RCTA system is displayed.

Temporary stop: Temporarily stops when reception of radar sensor waves failed due to some obstacles or when the temperature is not within the range of −40°C (−40°F) — 85°C (185°F).

Normal

Halt

SRVD System ON-OFF flag

ON/OFF status of BSD/RCTA system is displayed. If this flag is set to «OFF» while the values of «SRVD System fail flag» and «SRVD System HALT flag» are «Normal», the BSD/RCTA system is set to OFF by the BSD/RCTA OFF switch.

OFF

ON

LH-Side Target detection flag

Detection status of the control target vehicle on the rear left side is displayed.

Detection is possible if the target vehicle is moving when the own vehicle drives forward at 12 km/h (8 MPH) or more or backward at 0 km/h (0 MPH) or more.

Un-detect

Detect

LH-Side BSD caution 1st flag

ON is displayed when the 1st stage BSD warning on the left side is activated (when the outer mirror assembly illuminates).

OFF

ON

LH-Side LCA caution 1st flag

ON is displayed when the 1st stage LCA warning on the left side is activated (when the outer mirror assembly illuminates).

OFF

ON

LH-Side RCTA caution flag

ON is displayed when the RCTA warning on the left side is activated (when the outer mirror assembly illuminates and buzzer sounds).

OFF

ON

LH-Side Radar Voltage value

Power supply voltage of the radar sensor LH is displayed.

0 — 25.5 V

LH-Side Temperature value

Ambient temperature of the radar sensor LH is displayed.

−128 — 127°C

Ignition SW ON Count

Time stamp information General Description > CAUTION

Count

Time Count

«Subaru Rear Vehicle Detection(RH)»

Display

Content

Reference value

Note

SRVD System fail flag

Current failure status of BSD/RCTA system is displayed.

Normal

Fail

SRVD System HALT flag

Current temporary stop status of BSD/RCTA system is displayed.

Temporary stop: Temporarily stops when reception of radar sensor waves failed due to some obstacles or when the temperature is not within the range of −40°C (−40°F) — 85°C (185°F).

Normal

Halt

SRVD System ON-OFF flag

ON/OFF status of BSD/RCTA system is displayed. If this flag is set to «OFF» while the values of «SRVD System fail flag» and «SRVD System HALT flag» are «Normal», the BSD/RCTA system is set to OFF by the BSD/RCTA OFF switch.

OFF

ON

RH-Side Target detection flag

Detection status of the control target vehicle on the rear right side is displayed.

Detection is possible if the target vehicle is moving when the own vehicle drives forward at 12 km/h (8 MPH) or more or backward at 0 km/h (0 MPH) or more.

Un-detect

Detect

RH-Side BSD caution 1st flag

ON is displayed when the 1st stage BSD warning on the right side is activated (outer mirror assembly illuminates).

OFF

ON

RH-Side LCA caution 1st flag

ON is displayed when the 1st stage LCA warning on the right side is activated (outer mirror assembly illuminates).

OFF

ON

RH-Side RCTA caution flag

ON is displayed when the RCTA warning on the right side is activated (when the outer mirror assembly illuminates and buzzer sounds).

OFF

ON

RH-Side Radar Voltage value

Power supply voltage of the radar sensor RH is displayed.

0 — 25.5 V

RH-Side Temperature value

Ambient temperature of the radar sensor RH is displayed.

−128 — 127°C

Ignition SW ON Count

Time stamp information General Description > CAUTION

Count

Time Count

Operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. ...

Subaru select monitor
...

Other materials:

Dtc p013f o2 sensor delayed response - lean to rich bank 1 sensor 2
NOTE:For the diagnostic procedure, refer to DTC P013A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P013A O2 SENSOR SLOW RESPONSE - RICH TO LEAN BANK 1 SENSOR 21. OUTLINE OF DIAGNOSISDetect the delayed response of rear oxygen sensor output for lean > rich.After the deceleration fue ...

© 2017-2019 Copyright www.sulegacy.com