Honda Civic manuals

Subaru Legacy Owners Manual: Manual seat (if equipped)

Forward and backward adjustment

Forward and backward adjustment

  1. Sit in the seat to adjust.
  2.  Pull the lever upward, slide the seat to the desired position, and then release the lever.
  3.  Try to move the seat back and forth to make sure that it is securely locked into place.

Reclining the seatback

Reclining the seatback

  1. Pull up the reclining lever, adjust the seatback to the desired position, and then release the lever.
  2.  Make sure the seatback is securely locked into place.

The seatback placed in a reclined position can spring back upward with force when pulling up the lever. While operating the lever to return the seatback, hold the seatback lightly so that it may be raised back gradually.

Seat cushion height adjustment (driver's seat)

Seat cushion height adjustment

  1. Push the lever down to lower the seat.
  2.  Pull the lever up to raise the seat.

You can adjust the height of the seat by moving the seat cushion adjustment lever up or down.

Front seats
WARNING  Never adjust the seat while driving to avoid loss of vehicle control and personal injury.  Before adjusting the seat, make sure the hands and feet of rear ...

Power seat (if equipped)
...

Other materials:

Inspection
1. Taper roller bearingReplace the taper roller bearing in the following cases.• In case of broken or rusty taper roller bearings• In case of worn or damaged taper roller bearings• When the taper roller bearings fail to turn smoothly or emit noise in rotation after transmission gea ...

© 2017-2020 Copyright www.sulegacy.com