Honda Civic manuals

Subaru Legacy Owners Manual: Outback

Outback

  1. Apply a flat-head screwdriver to the light cover as shown in the illustration, and pry the light cover off from the rear gate trim.

Outback

  1. Turn the bulb socket counterclockwise and remove it.

Outback

  1. Pull the bulb out of the bulb socket and replace it with a new one.
  2.  Install the bulb socket by turning it clockwise.
  3.  Install the light cover on the rear gate.
Legacy
NOTE It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. Open the trunk. Remove the trunk trim lining by remov ...

License plate light
...

Other materials:

Installation
Install in the reverse order of removal while being careful of the following.1. EVAPORATION PIPE INSTALLATION1. Install the evaporation pipe to the vehicle.2. Install the evaporation pipe protector.Tightening torque:T1: 1 N·m (0.1 kgf-m, 0.7 ft-lb)T2: 7.5 N·m (0.7 kgf-m, 5.4 ft-lb)3. I ...

© 2017-2019 Copyright www.sulegacy.com