Subaru Legacy BN/BS (2015-2019) Service Manual: Power rear gate buzzer

Installation

1. Install the power rear gate auto closer.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)2. Install the trim panel - rear gate.3. Connect the ground terminal to battery sensor. NOTE ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - rear gate. Rear Gate Trim > REMOVAL3. Remove the power rear gate buzzer.(1) Disconnect the connector.(2) Release ...

Other materials:

Disassembly
1. Using a flat tip screwdriver or pliers, loosen the boot band on the large end of DOJ boot.CAUTION:Be careful not to damage the boot.2. Remove the boot band on the small end of DOJ boot in the same manner.3. Remove the large end of DOJ boot from DOJ outer race.4. Remove the round snap ring at the ...