Subaru Legacy BN/BS (2015-2019) Service Manual: Preparation tool
1. SPECIAL TOOL ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS | | 18471AA000 | FUEL PIPE ADAPTER | Used for draining fuel. | | 42099AE000 | QUICK CONNECTOR RELEASE | Used for removing the quick connector of the fuel delivery tube. | | 18460AA050 | CHECK BOARD | Used for inspecting the fuel system. | | — (Newly adopted tool) | SUBARU SELECT MONITOR 4 | Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”. |
2. GENERAL TOOL TOOL NAME | REMARKS | Circuit tester | Used for measuring resistance, voltage and current. | Oscilloscope | Used for inspecting the waveform of each sensor. | Mighty Vac | Used for inspecting the manifold absolute pressure sensor. | DST-i | Used together with Subaru Select Monitor 4. |
|
• Prior to starting work, pay special attention to the following:1. Always wear work clothes, a work cap, and protective shoes. Additionally, wear a helmet, protective goggles, etc. if necessary ...
1. INTAKE MANIFOLD ASSEMBLY 1(1)Intake manifold protector(5)Manifold absolute pressure sensorTightening torque: N·m (kgf-m, ft-lb)(2)Cushion(6)O-ringT1:3.4 (0.3, 2.5)(3)Gasket(7)Purge control s ...
Other materials:
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the air intake duct. Air Intake Duct > REMOVAL3. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the clip (B) from the air cleaner case (rear).4. Loosen the clamp (A) securing the ...