1. Remove the V-belts. V-belt > REMOVAL 2. Remove the crank pulley. Crank Pulley > REMOVAL 3. Remove the chain cover. Chain Cover > REMOVAL 4. Remove the timing chain assembly. Timing Chain Assembly > REMOVAL 5. Use the ST to lock the cam sprocket, and remove the cam sprocket bolt.
• IN side • EX side 6. Remove the cam sprocket. |
Dtc c1955 lh actuator
DTC DETECTING CONDITION:A fault is detected if mechanical sticking or abnormal operation of the rear brake caliper LH is detected.TROUBLE SYMPTOM:Parking brake system does not operate.WIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Parking brake / brake fluid lev ...