Honda Civic manuals

Subaru Legacy Owners Manual: Security indicator light

This indicator light shows the status of the alarm system. It also indicates operation of the immobilizer system.

Alarm system

It blinks to show the driver the operational status of the alarm system. For detailed information, refer to "Alarm system"  28.

Immobilizer system

The security indicator light starts blinking in the following conditions

For models with "keyless access with push-button start system":

  •  Immediately after the push-button ignition switch is turned to the "OFF" position.
  •  Immediately after the driver's door is opened or closed when all of the following conditions are met.
  •  The push-button ignition switch is in the "ON" or "ACC" position.
  •  The access key is outside the vehicle.
  •  The engine is not running.
  •  In the event that an unauthorized key is used (for example, the key is unregistered or the ID code does not match), the power is not switched to "ON" and the security indicator light continues blinking.

For models without "keyless access with push-button start system":

  •  Approximately 60 seconds after the ignition switch is turned from the "ON" position to the "ACC" or "LOCK" position.
  •  Immediately after the key is pulled out.

If the indicator light does not blink in the above conditions, it may indicate that immobilizer system may be malfunctioning.

Contact your nearest SUBARU dealer immediately.

In the event that an unauthorized key (for example, an unauthorized duplicate) is used, the security indicator light illuminates.

For details about the immobilizer system, refer to "Immobilizer" .

NOTE

  •  The security indicator light remains off in the following conditions. It means that the matching of the ID code is completed and the immobilizer system is deactivated, and it does not indicate a malfunction.

    Models with "keyless access with push-button start system":

  •  while the engine is running
  •  the push-button ignition switch has been turned to the "ON" or "ACC" position and the driver's door has not been opened or closed

Models without "keyless access with push-button start system":

  •  while the engine is running
  •  for approximately 60 seconds after the ignition switch is turned from the "ON" position to the "ACC" or "LOCK" position
  •  when the ignition switch is in the "ON" position.
  •  Even if a malfunction occurs, such as the security indicator light flashes irregularly, it will not affect the functionality of the immobilizer system.
Warning chimes and warning indicator of the keyless access with push-button start system (if equipped)
Access key warning indicator The keyless access with push-button start system is equipped with a warning chime and the access key warning indicator in order to minimize improper operations and ...

Select lever/gear position indicator
Upshift indicator  Downshift indicator  Select lever/gear position indicator For CVT models, the select lever position is displayed on the indicator. For MT models, the cur ...

Other materials:

Dtc u0169 lost communication with sunroof control module
DTC DETECTING CONDITION:No data is received from sunroof unit.TROUBLE SYMPTOM:The sunroof does not operate normally.WIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Sunroof Control System Sunroof Control System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK DTC.Read the D ...

© 2017-2019 Copyright www.sulegacy.com