Honda Civic manuals

Subaru Legacy Owners Manual: Shift lock function

The shift lock function helps prevent the improper operation of the select lever.

  •  The select lever cannot be operated unless the ignition switch is turned to the "ON" position and the brake pedal is depressed.
  •  The select lever cannot be moved from the "P" position to any other position before the brake pedal is depressed.

    Depress the brake pedal first, and then operate the select lever.

  •  Only the "P" position allows you to turn the key from the "ACC" position to the "LOCK" position and remove the key from the ignition key cylinder (models without "keyless access with push-button start system").
  •  Only the "P" position allows you to turn the push-button ignition switch to the "OFF" position (models with "keyless access with push-button start system").
  •  If the ignition switch is turned to the "LOCK"/"OFF" position while the select lever is in the "N" position, the select lever may not be moved to the "P" position after a period of time. Therefore, move the select lever to the "P" position with the brake pedal depressed soon after the ignition switch is turned to the "LOCK"/ "OFF" position.
Select lever
1) Select lever button : With the brake pedal depressed, shift while pressing the select lever button in : Shift while pressing the select lever button in : Shift without pressing th ...

Shift lock release
If the select lever cannot be operated, turn the ignition switch back to the "ON" position then move the select lever to the "P" position with the select lever button pressed and brake pedal depre ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.3. Remove the air intake boot from the air cleaner case (rear) and throttle body, and move it to the left side wheel apron.4. Loosen the bolts holding th ...

© 2017-2019 Copyright www.sulegacy.com