Honda Civic manuals

Subaru Legacy Owners Manual: Starting engine

  1. Apply the parking brake.
  2.  Shift the select lever into the "P" position.
  3.  Depress the brake pedal.

Starting engine

  1. Hold the access key with the buttons facing you, and touch the push-button ignition switch with it.

    When the communication between the access key and the vehicle is completed, a chime (ding) will sound. At the same time, the push-button ignition switch turns to the "ACC" or "ON" position.

  2.  After the push-button ignition switch turns to the "ACC" or "ON" position, while depressing the brake pedal, press the push-button ignition switch.

NOTE If the engine does not start even though the above procedure was followed precisely, contact your SUBARU dealer

Switching power status
Apply the parking brake.  Shift the select lever into the "P" position.  Depress the brake pedal. Hold the access key with the buttons facing you, and touch the push-but ...

Trunk lid (Legacy) - if the trunk lid cannot be opened
NOTE If you open the trunk lid with a key while the alarm system is armed, the alarm system is triggered and the vehicle's horn sounds. In this case, perform any of the following operations. ...

Other materials:

Dtc p0851 park/neutral switch input circuit low
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• En ...

© 2017-2020 Copyright www.sulegacy.com