Honda Civic manuals

Subaru Legacy Service Manual: Tumble generator valve specification

Subaru Legacy Service Manual / Fuel injection (fuel systems)(h4do) / Tumble generator valve specification

The tumble generator valve is integrated in the intake manifold assembly.

Refer to “Intake Manifold Assembly” for removal and installation. Intake Manifold Assembly > REMOVAL Intake Manifold Assembly > INSTALLATION

Throttle position sensor specification
Throttle body is a non-disassembled part, so do not remove the throttle position sensor from throttle body.Refer to “Throttle Body” for removal and installation procedure. Throttle Body > ...

Tumble generator valve actuator specification
The tumble generator valve actuator must not be removed from the intake manifold assembly since it is integrated in the intake manifold assembly.Refer to “Intake Manifold Assembly” for rem ...

Other materials:

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the front tires.3. Lift up the vehicle.4. Remove the front under cover. Front Under Cover > REMOVAL5. Using the TORX® bit T70, remove the drain plug, and drain the transmission gear oil completely.CAUTION:• Immediately aft ...

© 2017-2019 Copyright