Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Owners Manual: Using the cover

Subaru Legacy BN/BS (2015-2019) Owners Manual / Interior equipment / Cargo area cover (Outback - if equipped) / Using the cover

To extend the cargo area cover:

Using the cover

1) Stopper

  1.  Hold the handle located at the center of the cargo area cover and lift the handle upward slightly to unlock the stoppers that are located at the right and left end of the cover.

Using the cover

  1. Pull the handle toward you to extend the cargo area cover. Then insert its hooks into the catches as shown.

To rewind the cargo area cover:

  1.  Hold the handle located at the center of the cargo area cover, pull it toward you and lift up slightly to unlock the cargo area cover from the catches.

Using the cover

1) Stopper

  1. Slowly rewind the cargo area cover completely. Then lift the handle upward slightly to lock the stoppers.
WARNING Do not place anything on the extended cover. Putting excessive weight on the extended cover can break it and an object on the cover could tumble forward in the event of a sudden stop or collision. This could cause serious injury.

 

CAUTION
  •  Be careful not to scratch the rear gate stays while extending and rewinding the cover. Scratches on the stays could cause leakage of gas from the stays, which may result in their inability to hold the rear gate open.
  •  When reclining the rear seatback, move the front cover backward so that the cover is not damaged.
Cargo area cover (Outback - if equipped)
The cargo area cover is provided for covering the cargo area and to protect its contents from direct sunlight. This cover is detachable to make room for additional cargo. ...

To install the front cover
CAUTION When reclining the rear seatback, move the front cover backward so that the cover is not damaged. Align the right side of the front cover with the triangle mark ...

Other materials:

Installation
1. SEDAN MODEL1. Install the license plate light bulb.CAUTION:Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.2. Install the license plate light.3. Install the garnish - trunk. Trunk Lid Garnish > INSTALLATIONTightening torque:4.5 N·m (0.5 kgf-m, 3.3 ...

© 2017-2024 Copyright www.sulegacy.com