Subaru Legacy BN/BS (2015-2019) Service Manual: Water pipe assembly

Installation

1. ENGINE SIDE1. Install a gasket to thermostat.NOTE:Use a new gasket.2. Install the thermostat and thermostat cover.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)(A)Thermostat cover(B)Gasket ...

Removal

1. WATER PIPE ASSEMBLY RH1. Disconnect the ground terminal from battery sensor. NOTE2. Drain engine coolant. Engine Coolant > REPLACEMENT3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOV ...

Other materials:

Installation
1. Check and adjust the operating rod of the vacuum booster assembly.(1) Measure the length between the vacuum booster assembly mounting surface and clevis pin hole.(2) If it is not within the specification, loosen the lock nut, rotate the vacuum booster assembly operating rod to adjust the rod leng ...