Honda Civic manuals

Subaru Legacy Owners Manual: When the power rear gate is deactivated

CAUTION When operating the power rear gate manually, do not use excessive force. Doing so may cause a malfunction.

NOTE While the power rear gate is temporarily deactivated, if it is struck by body parts or objects and sustains a strong impact, the temporary deactivation may be canceled. The purpose of this is to absorb the impact of the collision and it is not a malfunction. In this case, the rear gate will not open or close automatically.

If the power rear gate senses a malfunction, an electronic chirp will sound and the rear gate will stop opening or closing.

In order for the rear gate to open and close automatically, carry out the following operation. If the rear gate does not open and close automatically after carrying out this operation, we recommend that you have the vehicle checked at a SUBARU dealer.

When the rear gate is closed

 

  1. Press and hold the rear gate opener button. If the rear gate does not open, perform the procedure described in "Rear gate (Outback) - if the rear gate cannot be opened" .
  2.  Gently close the rear gate by hand until it reaches the half-shut position.
  3.  Operate the power rear gate to confirm it is recovered.

When the rear gate is stuck at the fully open position or does not fully close

If the rear gate cannot be closed due to a dead battery, etc., while the rear gate is stopped midway, it can be closed by hand.

  1.  Gently close the rear gate by hand until it reaches the half-shut position.
  2.  Operate the power rear gate to confirm it is recovered.

When the rear gate cannot be opened

Perform the procedure described in "Rear gate (Outback) - if the rear gate cannot be opened" .

Power rear gate - if power rear gate does not operate properly
...

When the rear gate cannot be closed
CAUTION  On areas which are not flat, such as hills, do not conduct any of the following actions. The rear gate may close suddenly and hit someone's head, face or catch ...

Other materials:

Dtc p0700 transmission control system (mil request)
NOTE:For the diagnostic procedure, refer to AT section. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSISJudge as NG when there is CAN communication with the TCM and there is a MIL lighting request.2. EXECUTION CONDITIONSecondary ParametersExecution conditionBattery voltage≥ 10.9 V3. GENERAL DRI ...

© 2017-2019 Copyright www.sulegacy.com