Cruise control command switch malfunction is detected. While the command switch is pressed ON for a long time (approximately two minutes), stuck ON condition is detected. TROUBLE SYMPTOM: • Cruise control cannot be set. (Cancelled immediately.) • Cruise control cannot be released. Refer to DTC 11 for diagnostic procedure. Diagnostic Procedure with Cancel Code > 11 |
Installation
1. Install the intake oil control solenoid to the chain cover, and connect the connector to the intake oil control solenoid.NOTE:• Use new O-rings.• Apply engine oil to O-ring.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)2. Install the air intake duct. (RH side only) Air Intak ...