Subaru Legacy BN/BS (2015-2019) Owners Manual: Access key - if access key does not operate properly

Subaru Legacy BN/BS (2015-2019) Owners Manual / In case of emergency / Access key - if access key does not operate properly

CAUTION Keep metallic objects, magnetic sources and signal transmitters away from the area between the access key and the push-button ignition switch. They may interfere with the communication between the access key and the push-button ignition switch.

The following functions may be inoperable because of strong radio signals in the surrounding area or a low battery condition of the access key.

Locking/unlocking doors including rear gate
Switching power status
Starting engine

In such cases, perform the following procedure. When the battery of the access key is discharged, replace it with a new one. Refer to "Replacing battery of access key" F11-50.

Towing with all wheels on the ground

WARNING Never turn the ignition switch to the "LOCK"/"OFF" position while the vehicle is being towed because the steering wheel and the direction of the wheels wil ...

Locking and unlocking

1) Release button 2) Mechanical key While pressing the release button of the access key, take out the mechanical key. Lock or unlock the driver's door with the mechanical key in the procedu ...

Other materials:

Dtc b1632 curtain airbag sensor rh lost communication
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Curtain airbag sensor RH communication error (open/short circuit or connector connection failure between airbag CM and sensor, sensor internal communication circuit failure, CM internal communication circuit failure)C ...