Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Reduction driven gear / Adjustment

1. Measure clearance “A” between snap ring and transmission case.

Specification:

0.05 — 0.25 mm (0.002 — 0.01 in)

2. If clearance “A” is out of standard, select the snap ring within standard.

Snap ring
Part No.	Thickness mm (in)
805100460	2.0 (0.079)
805100461	2.1 (0.083)
805100462	2.2 (0.087)
805100463	2.3 (0.091)
805100464	2.4 (0.094)

Removal

1. Remove the transmission from the vehicle. Automatic Transmission Assembly > REMOVAL2. Remove the extension case. Extension Case > REMOVAL3. Remove the rear drive shaft. Rear Drive Shaft > REMOVA ...

Installation

1. Install the straight pin to reduction driven gear assembly.2. Fit the straight pin portion to the recess portion of transmission case and install the reduction driven gear and install the snap ring ...

Other materials:

Rear seat heater (if equipped)
Rear seat heater switch HIGH mode indicator LOW mode indicator Driver's side Front passenger's side Press the rear seat heater switch. Each time you press the switch, the mode will change as follows. When LOW mode is selected, the LOW mode indicator o ...