Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Transmission case / Adjustment

NOTE:

When replacing the transmission case with a new part, perform the following check and adjustment for the selection.

• Select the thrust bearing for the forward clutch assembly. Forward Clutch Assembly > ADJUSTMENT

• Select the snap ring for the reduction gear. Reduction Driven Gear > ADJUSTMENT

Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Remove the air breather hose. Air Breather Hose > REMOVAL3. Remove the transmission harness. Transm ...

Installation

1. Clean the mating surface of transmission case and converter case.2. Install the control device system. Transmission Control Device > INSTALLATION3. Install the O-ring to the lubrication pipe.NOTE: ...

Other materials:

Inspection
NOTE:When adding the engine coolant, always use SUBARU Super Coolant.1. Park the vehicle on a level surface.2. Check the engine coolant amount, and if the coolant level is low, check for the coolant leakage, and then add the engine coolant.(1) Make sure the engine coolant level in the reservoir tank ...