Adjust the clearance around the panel assembly - rear door as follows.
1. Adjust the vertical and horizontal positions of the panel assembly - rear door. (1) Loosen the body side bolts of the upper hinge - rear door and the lower hinge - rear door. (2) Adjust the vertical and horizontal clearance of the panel assembly - rear door. 2. Adjust the surface level gap between the panel assembly - rear door and the body. CAUTION: Do not use an impact wrench. Welding area on the striker nut plate is easily broken. (1) Loosen the screws (A). (2) Tap the striker - rear door (B) using a plastic hammer to adjust the surface level gap between the rear end of the panel assembly - rear door and the rear quarter. |
Basic diagnostic procedure procedure
CAUTION:• When performing diagnosis, observe the legal speed limit on the road.• The cancel code will also appear when the cruise control is cancelled by the driver’s operation. Do not confuse them.• Be sure to get an assistant to support the diagnosis while driving, and have ...