Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment

Adjust the clearance around the panel - rear gate as follows.

Part

Standard

A

Panel - rear gate to Roof panel

6.6+1.5, −1.0 mm (0.26+0.06, −0.04 in)

B

Surface level gap: Panel - rear gate to Roof panel

0.5+0.5, −1.5 mm (0.02+0.02, −0.06 in)

C

Finisher - light to Rear combination light

4.8±2 mm (0.19±0.08 in)

D

Surface level gap: Finisher - light to Rear combination light

0±1.6 mm (0±0.06 in)

E

Panel - rear gate to Bumper face - rear

8.0±1.5 mm (0.31±0.06 in)

1. Adjust the vertical and horizontal positions of the panel - rear gate.

(1) Loosen the mounting bolts of the hinge - rear gate.

(2) Adjust the vertical and horizontal clearance of the panel - rear gate.

Tightening torque:

25 N·m (2.5 kgf-m, 18.4 ft-lb)

2. Adjust the surface level gap between the panel - rear gate and the body.

(1) Remove the trim panel - rear skirt.

(2) Loosen the bolt.

(3) Tap the striker - rear gate using a plastic hammer to adjust the surface level gap between the panel - rear gate and the body.

Tightening torque:

25 N·m (2.5 kgf-m, 18.4 ft-lb)

Removal
1. REAR GATE PANEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the rod - power rear gate. (Model with power rear gate) Power Rear Gate Rod > REMOVAL3. Remove the trim panel - ...

Installation
1. REAR GATE PANELCAUTION:The panel - rear gate is heavy. When removing and installing it, always work in a team of two or more persons.1. Install the hinge - rear gate to the vehicle body.2. Temporar ...

Other materials:

Clear memory mode operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» display, select «Headlight / Foglight» and then select «Enter».5. On «Sele ...

© 2017-2024 Copyright www.sulegacy.com