Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment

1. Remove the bumper face - front. Front Bumper > REMOVAL

NOTE:

Remove the bumper face - front only at the first adjustment.

2. Remove the center ring clip from the lock assembly - front hood.

NOTE:

Remove the center ring clip only at the first adjustment.

After adjusting the lock assembly - front hood, dispose the clips since they are no longer needed.

The clips cannot be inserted because the clip holes become smaller due to adjustment.

3. Loosen the nuts through the adjustment window (a) of the lock assembly - front hood, and adjust the lock assembly - front hood while moving it up and down.

CAUTION:

After adjustment, tighten the bolts securely.

Tightening torque:

33 N·m (3.4 kgf-m, 24.3 ft-lb)

Removal
1. Open the front hood.2. Remove the air intake duct. Air Intake Duct > REMOVAL3. Remove the bumper face - front. Front Bumper > REMOVAL4. Remove the bracket - grille.5. Remove the radiator upper br ...

Installation
CAUTION:• Install the bumper face - front so that the front end of the under cover (b) comes inside the bumper face - front (a).• Before installing the bumper face, match the claws on the ...

Other materials:

Removal
CAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION• Do not detach the immobilizer control module except when replacing the blower motor unit assembly.&b ...

© 2017-2024 Copyright www.sulegacy.com