Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment
1. NOZZLE - WINDSHIELD WASHER 1. Turn the wiper switch to OFF position. 2. While the vehicle is at a standstill, insert the washer nozzle adjustment tool (a) into upper side (b) and lower side (c) of the nozzle - windshield washer to perform necessary adjustment.
CAUTION: Washer nozzle is made of resin. If precision screwdriver (a) or equivalent is inserted into discharge port for adjustment, the discharge port can be deformed, and washer fluid cannot be sprayed.
3. Adjust the washer injection position as shown in the figure.
2. NOZZLE - WINDSHIELD WASHER EyeSight (MODEL WITH EyeSight ONLY) 1. Turn the wiper switch to OFF position. 2. Adjust the washer injection position as shown in the figure.
|
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the arm assembly - windshield wiper. Front Wiper Arm > REMOVAL3. Remove the cowl panel - side and the cowl panel assembly. Cowl ...
Installation
CAUTION:Before installing the windshield glass and cowl panel, make sure there are no gravel in the installing area.1. Install the nozzle - windshield washer.(1) Install the nozzle - windshield washer ...
Other materials:
Electrical component location location
(1)Front sub sensor RH(12)Seat belt pretensioner RH(23)Fuse box(2)Front sub sensor LH(13)Seat belt pretensioner LH(24)Front door impact sensor LH(3)Airbag control module(14)Curtain airbag sensor RH(25)Front door impact sensor RH(4)Airbag main harness(15)Curtain airbag sensor LH(26)Door harness LH(5) ...
