Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment

Subaru Legacy BN/BS (2015-2019) Service Manual / Wiper and washer systems / Front wiper arm / Adjustment

1. Operate the windshield wiper once.

2. Check that the wiper blade is aligned with the point mark.

3. If the wiper blade is not aligned with the point mark, perform the removal and installation of the windshield wiper. Front Wiper Arm > REMOVAL

Removal

1. Remove the cover - windshield wiper arm.2. Remove the nuts, and remove the arm assembly - windshield wiper.NOTE:Since the arm assembly - windshield wiper LH and RH can interfere with each other, re ...

Installation

1. Install the arm assembly - windshield wiper.NOTE:Since the arm assembly - windshield wiper LH and RH can interfere with each other, install the passenger’s side first.(1) Assemble the arm ass ...

Other materials:

Removal
1. Remove the rear differential. (Sedan model) Rear Differential (VA-type) > REMOVAL Rear Differential (T-type) > REMOVAL2. Disconnect the drain tube (A) from the drain filter.NOTE:Disconnect the quick connector as shown in the figure.(a)Slider3. Remove the drain filter.4. Disconnect the drain tub ...