Subaru Legacy BN/BS (2015-2019) Service Manual: Air cleaner element

Installation

1. Install the air cleaner case bracket to the vehicle.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the air cleaner case (front) to the vehicle body and air cleaner case bracket.N ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the air intake duct. Air Intake Duct > REMOVAL3. Disconnect the connector (A) from the mass air flow and intake air temperature s ...

Other materials:

Disassembly
NOTE:When replacing the coupling sleeve and synchronizer hub, replace them as a set. Because these must engage at the specified point, avoid disassembly as much as possible. If it is necessary to disassemble, mark the engaging points on the splines beforehand.1. Put vinyl tape around the main shaft ...