Subaru Legacy BN/BS (2015-2019) Service Manual: Air intake duct

Installation

1. Install the air intake boot, and connect the PCV hose.2. Tighten the clamp (C) securing the throttle body to the air intake boot.Tightening torque:3 N·m (0.3 kgf-m, 2.2 ft-lb)3. Tighten the ...

Removal

Remove the clip which secures the air intake duct, and remove the air intake duct. ...

Other materials:

Removal
1. TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the center exhaust pipe. Center Exhaust Pipe > REMOVAL4. Remove the center exhaust cover.5. Set the transmission jack under the transmission. Make sur ...