Subaru Legacy BN/BS (2015-2019) Service Manual: Airbag connector procedure
1. OCCUPANT DETECTION SYSTEM (BETWEEN AIRBAG REAR HARNESS AND SEAT HARNESS) 1. How to disconnect: Press the lock arm (A) and disconnect the connector. CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
2. How to connect: Holding the connector, push it in securely until a clicking sound is heard. CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked. 2. AIRBAG CONTROL MODULE Refer to the airbag system section. Airbag Connector > PROCEDURE 3. BUCKLE SWITCH RH Refer to the airbag system section. Airbag Connector > PROCEDURE |
Airbag warning light illumination pattern inspection
Turn the ignition switch to ON, and confirm that the airbag warning light remains on for approx. 6 seconds then turns off afterwards.(1)Airbag warning light(2)Approx. 6 seconds(3)Ignition switch ON ...
Other materials:
Shifting speeds
Recommended shifting speeds
The best compromise between fuel economy
and vehicle performance during
normal driving is ensured by shifting up
at the speeds listed in the following table.
Maximum allowable speeds
WARNING
When shifting down a gear, ensure
that the vehicle is not ...
