Subaru Legacy BN/BS (2015-2019) Service Manual: Airbag system
Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system
- Airbag connector procedure
- Airbag module disposal (deployment processing on vehicle) procedure
- Inspection locations after a collision inspection
- Airbag control module
- Curtain airbag module
- Curtain airbag sensor
- Driver’s airbag module
- Front door impact sensor
- Front sub sensor
- General description
- Passenger’s airbag module
- Roll connector
- Seat cushion airbag module
- Side airbag module
- Side airbag sensor
Inspection
1. COMMUNICATION FOR INITIALIZING IMPOSSIBLEDTC DETECTING CONDITION:• Defective harness connector• Defective CAN communicationTROUBLE SYMPTOM:Communication is impossible between the airbag ...
Airbag connector procedure
1. POWER SUPPLY1. How to disconnect:CAUTION:When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.(1) Pull the slide lock (a) in the direction of arrow ...
Other materials:
Installation
Install in the reverse order of removal while being careful of the following.1. EVAPORATION PIPE INSTALLATION1. Install the evaporation pipe to the vehicle.2. Install the evaporation pipe protector.Tightening torque:T1: 1 N·m (0.1 kgf-m, 0.7 ft-lb)T2: 7.5 N·m (0.7 kgf-m, 5.4 ft-lb)3. I ...
© 2017-2025 Copyright www.sulegacy.com
