Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly
CAUTION: When replacing the reservoir tank, adhere the label to the position shown in the figure. (C0 and C5 models) Fluid caution label: C0 and C5 models Part No. 25080GA010
1. Install the seal to the cylinder body assembly. 2. Install the reservoir tank. CAUTION: Be careful not to tighten a vise excessively. (1) Place the master cylinder assembly between aluminum plates and fix it on a vise. (2) Drive the pin using a punch and a hammer to install the reservoir tank. |
Removal
CAUTION:• Do not allow brake fluid to come in contact with the painted surface of the vehicle body. If it does, wash off with water and wipe away completely.• Prepare a container to catch ...
Installation
1. Replace the seal sub assembly for the master cylinder assembly with a new part.CAUTION:Be careful not to install the seal sub assembly in the wrong location.(a)Primary piston(b)Seal sub ASSY(c)Inst ...
Other materials:
Inspection
Repair or replace the differential gear in the following cases:• When the hypoid driven gear and drive pinion shaft tooth surfaces are damaged, excessively worn, or seized.• When the roller bearing on the drive pinion shaft has a worn or damaged roller path.• When there is damage, ...
