Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly

NOTE:

During assembly, apply hydraulic oil to all parts.

Recommended brake fluid:

New FMVSS No. 116 DOT3 or DOT4

1. Install the piston spring.

2. Insert piston into the operating cylinder.

3. Install push rod to the boot.

4. Install the boot and push rod.

Removal
CAUTION:Brake fluid spilled on the vehicle body will harm the paint surface; therefore, wash it off with water and wipe clean quickly if spilled.1. Disconnect the ground terminal from battery sensor. ...

Installation
NOTE:• Use a new gasket.• Be sure to install the clutch hose with the mark side facing upward.• Be careful not to twist the clutch hose during installation.• Before installing ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Release the hook, and remove the under cover assembly - passenger.3. Remove the blower resistor.(1) Disconnect the connector.(2) Remove the screw and remove the blower resistor. ...

© 2017-2024 Copyright www.sulegacy.com