Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly
1. DRIVE SPROCKET 1. Using the ST, install the ball bearing. NOTE: ST 499755502 | PRESS SNAP RING |
2. Install the snap ring. |
1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Remove the torque converter assembly. Torque Converter Assembly > REMOVAL3. Remove the oil pump chain cover.NOTE:Oil ...
1. Clean the mating surface of oil pump chain cover and converter case.2. Using the ST, install the oil seal.NOTE:• Use a new oil seal.• Apply CVTF to the oil seal lip and press-fitting su ...
Other materials:
Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Disconnect the connector (A) from the oi ...