Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Intermediate case / Assembly

1. Install the reverse brake. Reverse Brake Assembly > ASSEMBLY

2. install all plugs to intermediate case.

Tightening torque:

25 N·m (2.5 kgf-m, 18.4 ft-lb)

NOTE:

Use new O-rings.

3. Install the parking support.

Tightening torque:

25 N·m (2.5 kgf-m, 18.4 ft-lb)

4. Install the CVTF filler plug.

NOTE:

Replace the gasket of CVTF filler plug with a new part after installing the transmission assembly to vehicle and adjusting CVTF fluid.

Removal

1. Remove the transmission assembly from vehicle body. Automatic Transmission Assembly > REMOVAL2. Remove the extension case. Extension Case > REMOVAL3. Remove the parking pawl. Parking Pawl > REMO ...

Installation

1. Clean the mating surface of intermediate case and transmission case.2. Face the O-ring side of the CVTF filter to the intermediate case side, and install the CVTF filter.NOTE:Apply CVTF to the O-ri ...

Other materials:

Installation
1. MID SWITCHCAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION• Do not allow harness and connectors to interfere or get tangled up with other parts.&bu ...